Skip to content

Broda Clarity Masonry & Concrete (MC) Clear Sealer

SKU 1-CCMC-01 Broda Clarity Masonry - Concrete
by Broda
Original price $56.00 - Original price $244.00
Original price
$56.00
$56.00 - $244.00
Current price $56.00
Availability:
in stock
Availability:
in stock

Broda Clarity Masonry – Concrete Acrylic Sealer is a water borne, very fine particle size, pure acrylic, cross linking acrylic finish. Broda Clarity is a water white, flexible, penetrating, vapour permeable, non-ambering finish with excellent UV stability and mildew resistance. Broda Clarity is a versatile coating with extremely low VOCs, low odour, is non-flammable and has good open time. Broda Clarity can be applied over a wide range of temperatures and humidity.

  • Interior and exterior concrete, brick and masonry
  • Clear Sealer
  • Tintable
      bread
      Carbon-neutral shipping with Shopify Planet
      Carbon-neutral shipping on all orders
      2,942kg
      shipping emissions removed
      That's like...
      7,530
      miles driven by an average gasoline-powered car
      We fund innovations in...
      Direct Air Capture
      Bio Oil
      Mineralization

      Untitled section

      Use onConcrete, masonry, wood, stone,  exposed aggregate, paving stones, bricks, interior or exterior
      ColourMilky, liquid
      AppearanceAmber, liquid
      FlammabilityNone
      Coverage100 – 400 sq. ft./gal. depending on type, age and porosity of surface
      Drying Time @ 50% RH

      @15C 

      • Touch: 1 Hour
      • Recoat: 8 Hours

       

      @20C

      • Touch: 0.5 Hours
      • Recoat: 4 Hours

       

      Temperature and humidity dependant.

      Air and surface temperature should not drop below 1C for 48 hours after application

      Finish

      0 - 5 units at 850  rough surface

      10 –35 units at 850 smooth surface

      VOC<45 grams/liter
      Volume Solids10%
      Weight per Gallon8.45 lb/gal
      Weight Solids11%

      Application

      When the temperature is at or lower than 3C, substrates may be colder. Prior to application ensure the air, surface and material temperature is above 1C. Avoid using if rain or snow is expected on the coated surface within 48 - 72 hours at low temperatures. 

      BrushNo reduction necessary. Use a natural bristle brush. (ie. Corona Oil-Stain-It)
      RollerNo reduction necessary. Use a 10mm – 20mm roller cover.
      Spray-Airless: 

      Pressure: 2000 psi 

      Tip: .011 - .015

      Reduction:  Not necessary

      Spray-HVLP

      Tip:  Standard needle

      Reduction:  Not necessary. 

      Downloads

      Interested in Deals and New Products?

      Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.

      Skip to content