Skip to content

Stiebel Eltron DHC-E 12/15-2 Plus Point-of-Use Electric Tankless Water Heater

SKU 200056
Original price $449.00 - Original price $449.00
Original price
$449.00
$449.00 - $449.00
Current price $449.00
Availability:
in stock

Stiebel Eltron DHC-E 12/15-2 Plus incorporates the new Direct Coil™ heating technology, Stiebel Eltron’s most advanced technology. 240/208V - 12.0/14.4 kW Direct coil tankless electric with advanced flow control. 

DHC-E Plus models include both the robust and trouble-free Direct Coil heating system and also Advanced Flow Control. If hot water demand exceeds working capacity, Advanced Flow Control automatically maintains consistent temperatures by slightly reducing flow.

DHC-E Plus models are equipped with our largest digital display screen. Desired output temperature is easily set using the dial and display on the cover. These models also have additional features such as a cost savings calculator, real-time capacity monitoring, preset temperature buttons, and for safety, a user-selectable scald guard setting, and a front-panel control lock-out setting.

Features:

  • Direct Coil heating system’s proven and trouble-free technology self-cleans for increased limescale resistance
  •  Switchable kW power output means each model can cover more applications
  •  Ideal for many commercial applications including bathrooms, break rooms, utility sinks, or a single shower
  •  Heats water on demand, for endless hot water as long as it is needed but model size must be carefully matched to the application for proper operation
  •  Electronic self-modulation technology ensures the least amount of electricity needed is used
  •  Sleek European design is considerably smaller than a tank, requires no venting, and allows space-saving installation close to the point-of-use
  •  Direct Coil heating system provides fast heat-up and response
  •  Advanced Flow Control ensures constant water temp no matter what - no cold water "surprises"
  •  Large backlit interactive display shows temperature, flow rate information, cost savings calculator, and more
  •  2 temperature preset buttons for quick adjustments
Carbon-neutral shipping with Shopify Planet
Carbon-neutral shipping on all orders
2,934kg
shipping emissions removed
That's like...
7,510
miles driven by an average gasoline-powered car
We fund innovations in...
Direct Air Capture
Bio Oil
Mineralization

Specifications

Model DHC-E 4/6-2 Trend

DHC-E 8/10-2 Trend 

DHC-E 8/10-2 Plus

DHC-E 12/15-2 Trend 

DHC-E 12/15-2 Plus

Item no.200061

200058 (Trend) 

202145 (Plus)

200059 (Trend) 

200056 (Plus)

Phase - 50/60 Hz1
Voltage240 V208 V240 V208 V240 V208 V
Wattage (1) , Jumper Position 1 [Low] / 2 [High]3.8 kW / 6 kW2.9 kW / 4.5 kW7.2 kW / 9.6 kW5.4 kW / 7.2 kW12 kW / 14.4 kW9 kW / 10.8 kW
Amperage, Jumper Position 1 [Low] / 2 [High]15.8 A / 25 A13.9 A / 21.7 A30 A / 40 A26 A / 34.6 A50 A / 60 A43.3 A / 52 A
Min. Recommended Circuit Breaker Size (2) , Jumper Position 1 [Low] / 2 [High]20 A / 25 A15 A / 25 A30 A / 40 A30 A / 35 A50 A / 60 A50 A / 60 A
Min. Recommended Awg Wire Size (3) , Jumper Position 1 [Low] / 2 [High12/2 / 10/214/2 / 10/210/2 / 8/2 10/2 / 8/28/2 / 6/28/2 / 6/2
Minimum Water Flow to Activate Unit0.264 gpm (1.0 l/min)
Max Flow Rate (GPM) @ 42°F0.5 GPM / 0.85 GPM1 GPM / 1.4 GPM1.7 GPM / 2 GPM
Max Flow Rate (GPM) @ 52°F0.7 GPM / 1.o GPM0.9 GPM / 1.5 GPM1.4 GPM / 2.3 GPM
Max Flow Rate (GPM) @ 62°F1.3 GPM / 1.7 GPM1.8 GPM / 2.3 GPM2.7 GPM / 3.6 GPM
Max Flow Rate (GPM) @ 72°F2.2 GPM / 2.6 GPM2.9 GPM / 3.5 GPM4.6 GPM / 5.5 GPM
Weight5.5 lb (2.5 kg)
DimensionsHeight 14 1/8" (360 mm) x Width 8" (202 mm) x Depth 4 5/16" (109 mm) 
Nominal Water Volume0.07 gal (0.277 l)
Max. Permissible Inlet Temperature149 °F (65 °C)
Maximum Permissible Pressure145 psi (10 bar)
Water Connections (3)½" NPT

 

DHC-E 3/3.5-1 Trend and 4/6-2 Trend ship with pressure compensating flow-reducer/aerators that must be installed. 

  1. Factory default setting is jumper position 2 [high]
  2. Overcurrent protection sized at 100% of load. Tankless water heaters are considered a non-continuous load. Use only GFCI Class A circuit breakers.
  3. Copper conductors with a temperature rating of 75 °C or greater must be used. Conductors should be sized to maintain a voltage drop of less than 3% under load. 

 

These are recommendations. Check local codes for compliance if necessary

Documentation

Interested in Deals and New Products?

Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.

Skip to content