Skip to content
Harvest savings this November 🍂 Save 10%. "harvest" at checkout. Rise plants 3 trees 🌳 with every order to help reforest the planet.
Harvest savings this November 🍂 Save 10%. "harvest" at checkout. Rise plants 3 trees 🌳 with every order to help reforest the planet.

Stiebel Eltron DHC-E 12 Single or Multi-Point-of-Use Electric Tankless Water Heater

SKU 230628
Original price $337.00 - Original price $337.00
Original price
$337.00
$337.00 - $337.00
Current price $337.00
Fall into savings 🍂 Save 10% on select products with harvest at Checkout. Brand and product exclusions apply

The new DHC-E is a powerful, flexible, point-of-use water heating solution. The mighty DHC-E 12 offers high 12 kW output, in an affordable, compact package. Great for that kitchen sink at the end of a long pipe run, or for multiple low-flow sinks in a commercial application. 240/208V, 12 kW Copper ankless electric with thermostat

DHC-E can deliver hot water to a single sink, multiple sinks, or in certain conditions, low-flow showerheads.

You can control temperature simply by setting a dial. DHC-E models have the exclusive Electronic Temperature Control. This allows the temperature of the water to remain the same regardless of flow fluctuations. 

Features:

  •  Advanced microprocessor controls
  •  Best warranty in the industry
  •  Code compliance made easy
  •  No scalding
  •  Simple plumbing system design
  •  Sleek design fits in anywhere
  •  Seismic proof construction
  •  Proprietary technology
  •  Superior, reliable performance
  •  DHC-E models are suitable for booster applications, accepting a maximum incoming water temperature of 131 °F (55 °C).

Specifications

Model Item NumberDHC-E 8/10* DHC-E 12
Item No. 224201 230628
Phasesingle 50/60 Hzsingle 50/60 Hz
Voltage 240 V or 208 V240 V or 208 V
Wattage7.2/9.6 kW5.4/7.2 kW12 kW9 kW
Amperage30/40 A26/35 A50 A44 A
Min. recommended circuit breaker (1) (DP)30/40 A30/35 A 50 A50 A
Min. recommended wire size (2) (copper)10 AWG/8 AWG8 AWG

Maximum temperature

increase above ambient 

water temp.

@ 0.75 GPM66/87 °F 49/66 °F 92 °F 82 °F
@ 1.00 GPM49/66 °F 37/49 °F82 °F61 °F 
@ 1.50 GPM33/44 °F25/33 °F54 °F 41 °F
@ 2.25 GPM--36 °F27 °F
@ 3.00 GPM--27 °F20 °F
Min. water flow to activate unit 0.264 gpm (1.0 l/min)
Max. inlet water temperature131 °F (55 °C) 
Weight5.9 lb (2.7 kg) 
Nominal water volume0.13 gal (0.5 l)
Dimensions Width 7 1/8"(20.0 cm) x Height 14  /16" (36.0 cm) x Depth 4 1/8" (11.0 cm)
Minimum pressure30 psi (2 bar)
Working pressure150 psi (10 bar) 
Tested to pressure300 psi (20 bar)
Water connections ½" NPT

 

*DHC-E 8/10 is a single unit that is switchable at installation via jumper for output at 7.2 kW (Stage 1) or 9.6 kW (Stage 2). 

1 Overcurrent protection sized at 100% of load. Tankless water heaters are considered a non-continuous load. 

2 Copper conductors with a temperature rating of 75 °C or greater must be used. Conductors should be sized to maintain a voltage drop of less than 3% under load. 

 

These are recommendations. Check local codes for compliance if necessary. 

Videos

DHC Classic Brochure and Sizing Guide

Specifications and Installation Guide

Use and care/Warranty Information

Crossover Guide

Interested in Deals and New Products?

Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.