Skip to content
Rise Anniversary SALE 🎉 Save 10%. anni10 at checkout. Rise plants 3 trees 🌳 with every order to help reforest the planet.
Rise Anniversary SALE 🎉 Save 10%. anni10 at checkout. Rise plants 3 trees 🌳 with every order to help reforest the planet.

Broda PRO-TEK-TOR Siding, Log & Timber (SLT) Natural Oil Wood Finish

SKU 1-PTTSLTCTC-01 Broda Pro-Tek-Tor SLT Clear UV Top Coat
by Broda
Original price $84.00 - Original price $410.00
Original price
$84.00
$84.00 - $410.00
Current price $84.00
Rise Anniversary SALE 🎉 Save 10%. Use code anni10 at Checkout. Exclusions apply

Ideal as a deck or siding stain, PRO-TEK-TOR is a natural oil wood finish that is water-borne. This provides the best of both worlds – the durability of oil with low-VOC and easy cleanup. Oxide and trans-oxide pigments, (very finely ground colours), are suspended in linseed oil, tung oil and water. The addition of UV blockers and anti-mildew ingredients makes this family of coatings extremely durable, with no harsh solvent fumes and a rich, colourful finish available in more than 50 standard colours.

*LEED Complaint

      Untitled section

      Use onSiding, wall shingles, log walls, timber frames, soffiting,  trim, interior and exterior
      ColourClear, Transparent, Semi-Transparent, Semi-Solid
      AppearanceAmber, liquid
      FlammabilityNone
      Coverage

      Rough/porous: 150 – 300 sq. ft./gal

      Smooth: 250 – 400 sq.ft./gal.

      Drying Time @ 50% RH

      @5C

      • Touch: 8 Hours
      • Recoat:48 Hours

       

      @12C 

      • Touch: 5 Hour
      • Recoat: 24 Hours

       

      @20C

      • Touch: 2 Hours
      • Recoat: 12 Hours

       

      Temperature and humidity dependant.

      Air and surface temperature should not drop below 1C for 48 hours after application

      Finish0-5 units at 850
      VOC58 grams/liter
      Volume Solids16%
      Weight per Gallon8.4 lbs/gal

      Application

      When the temperature is at or lower than 3C, substrates may be colder. Prior to application ensure the air, surface and material temperature is above 1C. Avoid using if rain or snow is expected on the coated surface within 48 - 72 hours at low temperatures. 

      BrushNo reduction necessary. Use a natural bristle brush (ie. Corona Oil-Stain-It)
      RollerNo reduction necessary. Use a 10mm – 20mm roller cover.
      Spray-Airless: 

      Pressure: 2000 psi 

      Tip: .013 -- .015

      Reduction:  Not necessary

      Dip: No reduction necessary

      Spray-HVLP

      Tip:  Standard needle

      Reduction:  Not necessary. 

      Downloads

      Interested in Deals and New Products?

      Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.