Skip to content
Getting ready for 🛠️ reno season? Save 10% on select products at checkout* with "ready10"
Getting ready for 🛠️ reno season? Save 10% on select products at checkout* with "ready10"
Venmar SOLO AVS SOLO 2.0 ES 47720 Heat Recovery Ventilator

Venmar SOLO AVS SOLO 2.0 ES 47720 Heat Recovery Ventilator

SKU 47720
by Venmar
$1,758.00 - $1,758.00
$1,758.00
$1,758.00 - $1,758.00
$1,758.00
Availability:
in stock, ready to be shipped
Getting ready for 🛠️ reno season? Save 10% on select products with ready10 at Checkout. Brand and product exclusions apply

New to Rise? Get to know us.

The Solo 2.0 ES is designed for larger homes* and represents over 15 years of continuous improvement to deliver contractors the durability and reliability they expect from Venmar.

When used along with the Altitude IAQ wall control with SMART mode (automated ventilation based on indoor relative humidity and outdoor temperature), the Solo 2.0 ES optimizes your ventilation and energy consumption. Homeowners who want the best in heat-recovery ventilation choose the Solo 2.0 ES for its power, reliability, and quiet operation.

*Refer to local Building Code.

Please refer to the wall controls specification sheet to learn more about wall controls compatible with this unit.

      Delivery time / Order Processing & Shipping Times

      Rise ships manufacturer direct. We work hard so you receive your product(s) as quickly as possible. Shipping times are subject to each carrier's daily cut-off time, and dependent upon warehouse turnaround. Learn more about our order processing & shipping times here.

      Product Details and Specifications

      Features

      6" Round Ports

      Speed Control on unit: Low and High speeds (Other modes available with optional main wall controls.

      Housing: Pre-painted steel

      Insulation: Expanded polystyrene

      Mounting: Suspension by chains and springs

      ModelHRV Solo 2.0ES
      Part Number47720
      Heat Exchange Surface Area102 ft.2 (9.54 m2)
      TypeCrossflow
      HRV Core MaterialPolypropylene 
      Unit Electrical Characteristics120 volts, 60 Hz, 2.1 amps, 195 watts
      Supply & Exhaust Blower Motor1 PSC Motor
      Protection typeThermally protected
      Insulation classB
      Filters: 15 ppi washable reticulated foam

      15.375" x 7.125" x 0.75"

      (39 cm x 18 cm x 1.9 cm)

      Drains

      1/2" (1.2 cm) fittings with

      10 ft. (3 m) PVC drain hose

      Requirements and Standards
      • Complies with the UL 1812 requirements regulating the installation of Heat Recovery Ventilators
      • Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
      • Complies with CSA F326 requirements regulating the installation of Heat Recovery Ventilators
      • Technical data was obtained from published results of tests relating to CSA C439 Standards
      • HVI certified

      Optional Controls

      This unit is very simple to operate. Once it is installed, press on its push button, located on the bottom of the unit, to activate it. Press once for low speed, once again for high speed, and once more to stop it.

       

      For more convenience, this unit can also be controlled by an optional main control. For a complete list of optional main and auxiliary controls available, refer to the Wall Control Compatibility Chart.

      Downloads

      Spec Sheet
      User Guide

      Installation Manual

      Optional Controls Guide

      Dive into more

      Discover more about this product category, find related articles, videos, photos, rebates and more!

      Product Research

      Articles and Videos

      Photos with Heat Recovery Ventilator [HRV]

      Applicable Rebates

      Check to see if rebates or incentives in your area apply to save even more on this product

      Interested in Deals and New Products?

      Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.