Skip to content
Harvest savings this November 🍂 Save 10%. "harvest" at checkout. Rise plants 3 trees 🌳 with every order to help reforest the planet.
Harvest savings this November 🍂 Save 10%. "harvest" at checkout. Rise plants 3 trees 🌳 with every order to help reforest the planet.

Broda CLARITY Wood & Stone Eco-Friendly Waterborne Acrylic Finish

SKU 1-cwsc-01 clarity gloss clear
by Broda
Original price $84.00 - Original price $448.00
Original price
$84.00 - $448.00
Current price $84.00
Fall into savings 🍂 Save 10% on select products with harvest at Checkout. Brand and product exclusions apply

An acrylic coating made with ultra-small acrylic particles suspended in water. These acrylic coatings allow for fast, deep penetration on a variety of surfaces. Cold weather, high humidity, damp or dry substrates are no problem, allowing application virtually year-round in many climates. Perfect for many indoor projects or outdoor projects. Available in more than 50 standard colours.

  • Eco-Friendly
  • Interior and exterior wood & stone
  • Clear Top Coat
  • Tintable

    Untitled section

    Use onWood, stone, concrete, masonry, interior or exterior 
    AppearanceMilky, liquid
    Coverage200 – 400 sq. ft./gal. depending on type, age and porosity of surface
    Drying Time @ 50% RH


    • Touch: 1 Hour
    • Recoat: 8 Hours



    • Touch: 0.5 Hours
    • Recoat: 4 Hours


    Temperature and humidity dependant.

    Air and surface temperature should not drop below 1C for 48 hours after application

    Finish80 at 60o 
    VOC<90 grams/liter 
    Volume Solids20%
    Flash pointN/A
    Weight per Gallon8.5 lb/gal
    Weight Solids21.5%


    When the temperature is at or lower than 3C, substrates may be colder. Prior to application ensure the air, surface and material temperature is above 5C. Avoid using if rain or snow is expected on the coated surface within 48 -- 72 hours at low temperatures.

    BrushNo reduction necessary. Synthetic bristle.
    RollerDo not use

    Pressure: 2000 psi 

    Tip: .011- .015

    Reduction:  Not necessary


    Tip:  standard needle

    Reduction:  Not necessary. 


    Stir containers of Broda Clarity well. DO NOT SHAKE. Broda Clarity may be applied to dry or damp surfaces. Apply an even application, achieving recommended coverage. Spread any runs, puddles or drips evenly. On wood,, sand lightly between coats. Do not apply if freezing temperatures are anticipated within 24 hours. 


    Important: Not recommended to be applied in direct sunlight. 


    Interested in Deals and New Products?

    Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.