Skip to content

Saniflo 021 Saniswift Drain Pump

SKU 021
by Saniflo
Original price $416.95 - Original price $416.95
Original price
$416.95 - $416.95
Current price $416.95
in stock

The Saniswift drain pump is used to pump gray water away from various fixtures in residential applications. The system can discharge the waste up to 14 feet vertical or 140 feet horizontal. This model is powerful and economical with a compact design and multiple inlets, making it perfect for installations anywhere you can imagine.

An easy solution for a remote laundry room installation or any gray water application

  • Residential drain pump
  • ↑ 14 Ft ↑ or ← 140 Ft →
  • Compact design
  • Powerful and economical

        Delivery time / Order Processing & Shipping Times

        Rise ships manufacturer direct. We work hard so you receive your product(s) as quickly as possible. Learn more about our order processing & shipping times here.

        Carbon-neutral shipping with Shopify Planet
        Carbon-neutral shipping on all orders
        shipping emissions removed
        That's like...
        miles driven by an average gasoline-powered car
        We fund innovations in...
        Direct Air Capture
        Bio Oil


        Weight13 lbs.
        Inlets (in)1 1/2'' vent (top) 2'' (sides)
        Power supply120 V - 60 Hz
        Shower/bathtub base min height6" min
        Noise level (measured at 3 ft.)≤ 44 dBA
        Horizontal discharge140 ft
        Vertical discharge14 ft
        Amperage (Amps)4.5 Max
        Operating maximum temperature140 F°
        Discharge pipe diameter1 1/2"
        Tank volume2.75 gallons / 10.4 liters
        Method of activationPressure switch/circuit board
        Discharge rate at 14 ft18 gal/min (70 liters/min)
        Motor Speed (RPM)3600
        Motor0.3 HP oil-filled thermally protected motor
        Capacitor rating (microfarad)30
        Shut off head (ft)25
        Normal running time3-5 sec (short bursts)
        Certifying agenciesCSA (IPC, NSPC)
        Discharge rate at 3 ft24 gal/min (90.8 liters/min)
        Power cord length (in)48

        Additional Product Information

        The inside of the Saniswift is comprised of a pressure switch and circuit board assembly, which starts and stops the unit, and the motor, which drives the pump.


        When the water enters the Saniswift, it activates a pressure switch which in turn starts the motor. The motor is sealed for life in an oil-filled enclosure. A spindle/shaft drives the impeller, and therefore, the moving parts are kept to an absolute minimum.


        The unit pumps the effluent upward to 14 feet or 140 feet horizontally (with gravity fall). Once the water is discharged and the water level in the container goes down, the pressure switch deactivates the unit until water enters the unit again. A standard operating cycle for the Saniswift can be as short as 2 - 10 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal.


        In addition to a sink, the Saniswift will also accept and discharge the wastewater from various other sanitary fixtures such as a laundry sink, a shower, a urinal. When adding a shower, a base will have to be constructed. This base should be made out of a 2" x 6" (minimum) or 2” x 8” (recommended) on edge to allow for the installation of a P-trap and the required 1/4” per foot gravity flow towards the pump unit.


        The Saniswift can also accept gray water from a washing machine through an indirect connection such as a laundry sink.


        The wastewater from other sanitary fixtures is discharged into the Saniswift via two 1-1/2 inch inlets on either side of the housing and an additional inlet on the top of the unit. A non-return valve, which comes already assembled on the discharge rubber connector, prevents backflow into the unit.


        This unit has been designed with a vent connection on the lid. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent. It is also highly recommended that the gray water pump be connected to a Ground Fault Interrupter (GFI) circuit. The Saniswift is a compact unit with attractive rounded contours that fits neatly into tight spaces.


        The Saniswift has been certified to American and Canadian Standards. Electrical standard UL 778, CA: Electrical standard CSA C22.2


        Interested in Deals and New Products?

        Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.

        Skip to content