Skip to content
Rise Anniversary SALE 🎉 Save 10%. anni10 at checkout. Rise plants 3 trees 🌳 with every order to help reforest the planet.
Rise Anniversary SALE 🎉 Save 10%. anni10 at checkout. Rise plants 3 trees 🌳 with every order to help reforest the planet.

Stiebel Eltron DHC 10-2 Classic Single Sink Point-of-Use Electric Tankless Water Heater

SKU 202655
Original price $199.00 - Original price $199.00
Original price
$199.00
$199.00 - $199.00
Current price $199.00
Rise Anniversary SALE 🎉 Save 10%. Use code anni10 at Checkout. Exclusions apply

Stiebel Eltron DHC 10-2 Classic tankless water heaters are designed for installation at the point of use. 240V/208V - 9.6 kW copper tankless electric 

The DHC Classic heats water instantaneously as it flows through the unit. Stand-by heat losses are completely eliminated.

The heating element is controlled by a flow switch which means a DHC Classic can never dry-fire and fail prematurely. The efficient heating elements are controlled by a simple flow switch. All DHC Classics are hydraulically controlled, allowing quiet operation. DHC Classic water heaters are equipped with a safety high limit with a manual reset. The rugged all copper design ensures many years of reliable service.

Features:

  • A sleek new, modern housing with the same reliable copper heating system
  •  Up to 50% less power consumption compared to storage type heaters
  •  Hot water instantly
  •  Hydraulically controlled for quiet operation
  •  Resettable safety high limit switch
  •  Lower installation costs compared to tank-type units
  •  Exclusive copper-clad heating element
  •  Never dry fires and fails prematurely
  •  Superior reliability

Specifications

modelDHC 6-2 ClassicDHC 6-3 ClassicDHC 8-2 ClassicDHC 9-3 ClassicDHC 10-2 Classic
Item no. 202651202652202653202654202655
Phase - 50/60 Hz1
Voltage240 V208 V277 V240 V208 V277 V240 V208 V
Wattage6.0 kW4.5 kW 6.0 kW7.2 kW5.4 kW9.0 kW9.6 kW7.2 kW
Amperage25 A22 A21.7 A30 A26 A32.5 A40 A35 A
Min. recommended circuit breaker size (1)25 A25 A25 A30 A30 A35 A40 A35 A
Min. recommended wire size (2)12/2 AWG10/2 AWG10/2 AWG8/2 AWG8/2 AWG
Minimum water flow to activate unit0.48 gpm (1.8 l/min)0.48 gpm (1.6 l/min)0.69 gpm (2.6 l/min)0.8 gpm (3.0 l/min)0.8 gpm (3.0 l/min)
Weight5.5 lb (2.5 kg)5.5 lb (2.5 kg) 5.5 lb (2.5 kg) 5.5 lb (2.5 kg) 5.5 lb (2.5 kg) 
DimensionsWidth 7 15/16" (20.2 cm) x Height 14 3/16" (36.0 cm) x Depth 3 7/8" (9.8 cm)
Nominal water volume0.13 gal (0.5 l)
Max. permissible inlet temperature86 °F (30 °C)
Minimum pressure30 psi (2 bar)
Working pressure150 psi (10 bar)
Tested to pressure300 psi (20 bar)
Water connections (3)½" NPT

 

DHC 3-1, 3-2, 4-2 Classic ship with a 0.5 gpm (1.9 l/min) pressure compensating flow-reducer/aerator that must be installed. 

1 This is our recommendation for overcurrent protection sized at 100% of load (DP for 240/208/277 V & SP for 120 V models). Check local codes for compliance if necessary. Tankless water heaters are considered a non-continuous load. 

2 Copper must be used. Conductors should be sized to maintain a voltage drop of less than 3% under load. 

3 Suitable for supply with cold water only.

Videos

DHC Classic Brochure and Sizing Guide

Specifications and Installation Guide

Use and care/Warranty Information

Crossover Guide

Interested in Deals and New Products?

Keep up-to-date on deals and new home building products that benefit your health, your wealth, and the planet delivered right to your inbox.